Applications:
◦ General purpose spectrum analysis
◦ Radio network installation and maintenance
◦ Spectrum monitoring
◦ Spectrum management
◦ Interference hunting
◦ EMI/EMC compliance testing and troubleshooting
◦ Spectrum operations
◦ Radiation hazard (RADHAZ) testing
◦ Emissions control (EMCON) monitoring
◦ Signal intelligence (SIGINT) monitoring
SignalVu-PC application-specific licenses:
Download datasheet for more information
Applications include:
◦ General-purpose modulation analysis (27 modulation types including 16/32/64/256 QAM, QPSK, O-QPSK, GMSK, FSK, APSK)
◦ EMC/EMI analysis with CISPR peak, quasi-peak, and average detectors
◦ Buetooth® analysis of Basic Rate, Low Energy, and Bluetooth 5. Some support of Enhanced Data Rate
◦ P25 analysis of phase I and phase 2 signals
◦ WLAN analysis of 802.11a/b/g/j/p, 802.11n, 802.11ac
◦ LTE™ FDD and TDD Base Station (eNB) Cell ID and RF measurements
Mapping
◦ Pulse analysis
◦ AM/FM/PM/Direct Audio Measurement including SINAD, THD
◦ Playback of recorded files, including complete analysis in all domains
◦ Signal classification and survey
RF VSWR (RF Attn = 20 dB), typical:
< 1.2 (10 MHz to 3 GHz)
< 1.5 (>3 GHz to 7.5 GHz)
<1.9 (>7.5 GHz to 18 GHz)
RF VSWR preamp ON, RSA503A and RSA507A, typical:
< 1.5 (10 MHz to 6 GHz, RF ATT=10 dB, preamp on)
< 1.7 (> 6 GHz to 7.5 GHz, RF ATT=10 dB, preamp on)
<1.9 (>7.5 GHz to 18 GHz, RF ATT = 10 dB, preamp ON)
Maximum DC voltage:
±40 V (RF input)
Maximum safe input power:
+33 dBm (RF input, 10 MHz to 18.0 GHz, RF Attn ≥ 20 dB)
+13 dBm (RF input, 9 kHz to 10 MHz, RF Attn ≥ 20 dB)
+20 dBm (RF input, RF Attn < 20 dB)
Maximum safe input power (Preamp On):
+33 dBm (RF input, 10 MHz to 18.0 GHz, RF Attn ≥ 20 dB)
+13 dBm (RF input, 9 kHz to 10 MHz, RF Attn ≥ 20 dB)
+20 dBm (RF input, RF Attn < 20 dB)
Maximum measurable input power:
+30 dBm (RF input, ≥10 MHz to Fmax, RF ATT Auto)
+20 dBm (RF input, <10 MHz, RF ATT Auto)
Input RF Attenuator:
0 dB to 51 dB (1 dB step)
Frequency Range:
9 kHz-3.0 GHz
Frequency Marker Readout Accuracy:
±(RE × MF + 0.001 × Span) Hz
RE: Reference Frequency Error
MF: Marker Frequency [Hz]
Reference Frequency Accuracy:
Initial accuracy at Cal (30 min warm-up)
±1 x 10-6
First year aging, typical
±1 x 10-6 (1 year)
Cumulative error (Initial accuracy + temperature + aging), typical
3 x 10-6 (1 year)
Temperature drift
±0.9 x 10-6 (-10 to 60 °C)
External reference input
BNC connector, 50 Ω nominal
External reference input frequency
Every 1 MHz from 1 to 20 MHz plus the following: 1.2288 MHz, 2.048 MHz, 2.4576 MHz, 4.8 MHz, 4.9152 MHz, 9.8304 MHz, 13 MHz, and 19.6608 MHz.
The spurious level on the input signal must be less than -80 dBc within 100 kHz offset to avoid on-screen spurious.
External reference input range
± 5 ppm
External reference input level
-10 to +10 dBm
GNSS:
Accuracy, when locked to GNSS
±0.025 ppm2
GNSS Trained Accuracy, when GNSS antenna is disconnected
±0.025 ppm5
±0.08 ppm6
Minimum Event Duration for 100% POI:
15 μs
Weight:
2.99 kg (6.6 lb) with battery
For more information, download the product datasheet
More information on Amplitude and RF, Trigger, Noise and distortion, Phase noise, SignalVu-PC standard measurements and performance, Acquisition, Tracking generator, Input and output ports, Installation requirements, Physical characteristics, Environmental and safety, and Dynamics.